LEDSON Sarox9+ Gen2 LED Spot Light With Strobe Beacon - 160W 16,500 lumens
Sarox9+ Gen2 Strobe has 11,500 effective lumens and a solid 747-meter range in powerboost mode (360 meters in E-approved mode), providing a balanced combination of width and range. In addition, this variant of the Sarox9+ also has strobe lights with five different patterns and the ability to synchronize the lights with each other!
Strobe patterns
Single flash (ECE R65 approved), double flash, triple flash, quadruple flash, continuous hyper flash.
Synchronizable and with alternating flash pattern
Sarox9+ Gen2 Strobe can be synchronized with each other, which means that all of the lights use the same flash pattern and strobe synchronized. You can synchronize an infinite number of lights, i.e. there are no restrictions on the number of lights you use.
Pulse-Controlled powerboost - It doesn't get smoother than this
Sarox9+ Gen2 Strobe comes equipped with powerboost—an extra power mode for those moments when you need (or simply want) maximum brightness. A simple flick of the high beam lever activates this impressive brightness, allowing you to easily adjust the auxiliary light's output according to your needs. With the new generation of powerboost from Ledson, you can seamlessly switch modes using the high beam flash in just a few easy steps. Note: Your auxiliary light is delivered in E-approved mode. Please follow the instructions to activate powerboost mode.
Specifications:
- Strobe light with five different patterns (one R65-approved)
- Range E-approved mode: 360 m (1 lux)
- Range powerboost mode: 747 m (1 lux)
- With position light, yellow-orange or xenon white (connect the colour you want)
- Driving Beam light pattern (enhances the vehicle's regular high beam pattern)
- E-marked ECE R112 (Ref. 30), R65, R10 / R7 (white position light)
- EMC-protected (does not interfere with radio)
- Powerboost mode: 16,500 lumens (theoretical), 11,500 lumens (actual)
- Neutral white light (5000K)
- Combines TIR (Total Inner Reflection) with side-reflective optics to achieve the most even light distribution possible without disturbing spill light
- ETM (Electronic Thermal Management) - adjusts the strength of the diodes depending on how hot they are for optimal lifespan
- Pressure equalization membrane
- Aluminium housing
- Adjustable stainless steel bracket
- Polycarbonate lens
Technical data:
- 160W (4 x 30W LED + 4 x 10W LP LED)
- IP68/IP69K (water and dust proof)
- DT connector 6 pin supplied
- Voltage 9-36 V
- E-marked: 2,2A @ 12V and 1,1A @ 24V
- Powerboost: 13A @ 12V and 5,8A @ 24V
Dimensions & weight:
- Width: 218 mm
- Height: 218 mm (232 mm incl bracket)
- Depth: 84 mm
- Weight: 1,8 kg
Supplied:
- Ledson Sarox9+ Gen2 Strobe LED light 9"
- Bracket, bolts and screws for attaching the auxiliary light with either one or two attachment points
- DT connector (6-pole)
- Installation instructions
- DT adapter
Installation instructions for cables (detailed instructions included with the product):
- Red: Auxiliary light (+)
- Black: Auxiliary light / Position light (- ground)
- White: Position light (+) white light
- Yellow: Position light (+) yellow-orange light
- Green: Strobe light (+)
- Blue: Synchronization and strobe patterns
