LEDSON Astral LED Marker - Choice of colours and lens - Same fitment as Hella markers used on Kelsa bars, etc
LEDSON Astral side marker with two strong LEDs behind a diamond-pattern clear glass gives a frosted light for a stylish & distinctive look! E-marked R1 (E6) and thus approved as side marker. No metal = no rust while it is of course IP67 graded which makes it waterproof. Neither requires a recessed mounting when assembling. Choose between clear lens and black look (smoked lens)
2 different gaskets are included: one for flat mounting and one for pipe mounting.
Please Note: Dual Colour version is for 24Volt only, all other colours can be used with 12 or 24V!
Specifications:
- Two pcs LED/diodes
- Diamond pattern for a frosted light
- IP67 waterproof, stainless and shock resistant
- Voltage: 12V or 24V (Dual colour version is 24V only)
- E marked: Xenon white (R7), Orange (R91) and Red (R7)
- 2 x gaskets and screws included (flat and tube mounting)
Dimensions:
- Length: 79 mm
- Width: 22,2 mm
- Height: 6,5 mm
- Cable: 3 m
Dimensions (recessed):
- Length: 72,4 mm
- Width: 17,4 mm
NOTE! Should only be tightened by hand.
To avoid damage to the product and ensure proper function, the following must always be observed during installation:
The product must only be tightened by hand.
Electric or pneumatic tools must not be used, as this may damage the product.
Tighten the screws carefully until they bottom out and clamp securely (recommended torque approx. 0.4–1.0 Nm).
Use the supplied screws for installation, where provided.
